Suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive towards the materials from which the pump is made.
They are easy to use and are economical, they are ideal for domestic use and in particular for distributing water in combination with small pressure sets and for the irrigation of gardens and allotments.
The pump should be installed in an enclosed environment, or at least sheltered from inclement weather.
Liquid temperature up to 60°C
Ambient temperature up to 40°C
Total suction lift up to 8m
Continuous duty
Pump body: Mechanical seal:Cast iron, with brass/AISI304 SS insert if request
Pump support: Cast iron, with brass/AISI304 SS insert if request
Motor housing: Aluminum
Impeller: Brass
Motor shaft: Carbon steel, AISI304 SS if request
Mechanical seal: Ceramic/Graphite
Two-pole induction motor(n=2850 r.p.m)
Insulation Class B
Protection IP44
Continuous service S1
Thermal protector
Single-phase 220V/50Hz, 60Hz if request
| Performance Parameters | ||||||||||||||
| Model | INPUT POWER | Q(m³/h) | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 2.7 | 3 | |
| kW | HP | Q(L/min) | 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | |
| QB60 | 0.37 | 0.5 | H(m) | 33 | 29 | 25 | 21 | 17 | 13 | 9 | 5 | - | - | - |
| QB70 | 0.55 | 0.75 | 45 | 40 | 35 | 30 | 25 | 20 | 15 | 10 | 5 | - | - | |
| QB80 | 0.75 | 1 | 58 | 53 | 48 | 43 | 38 | 33 | 28 | 23 | 18 | 13 | 8 | |
| Model | INLET/OUTLET | N.W | L×W×H |
| (Inch) | (Kg) | (mm) | |
| QB60 | 1 "×1 " | 1 "×1 " | 280×140×170 |
| QB70 | 1 "×1 " | 1 "×1 " | 335×190×210 |
| QB80 | 1 "×1 " | 1 "×1 " | 340×190×210 |
| NO. | DESCRIPTION | NO. | DESCRIPTION | NO. | DESCRIPTION |
| 1 | Pump casing | 6 | Bearing | 11 | Capacitor |
| 2 | lmpeller | 7 | Rotor | 12 | Terminal cover |
| 3 | Mechanical seal | 8 | Fan cover | 13 | Board |
| 4 | "O" ring | 9 | Fan | 14 | Motor body |
| 5 | Pump support | 10 | Motor cover | 15 | Filling nut |
